MDVS Range

Emission and noise compliant units, redesigned and further improved, for bigger job sites. Performance and reliability, low life cycle cost.

Each compressor type has also a specific model with integrated after-cooler and condensates filtration, for sandblasting, optic fibres laying and all those applications where cool, dry air is required.

  • Wide range of pressures, with possibility of Dual Pressure

  • Ergonomic, durable machines

  • Lowest acoustic pressure levels as indicated in current legislation provisions

  • Emissions according to the latest parameters

  • Liquid cooling system for engine, more silent and less pollutant.

  • Progressive acceleration of engine with respect to demanded air, permitting lower fuel consumption

  • Accessibility for maintenance

  • “Intelligent System” enables a pre-heating of the engine without overloading it, the airend will start working only when the perfect conditions are reached. Same while turning off the machine after a depressurisation phase of the hydraulic circuit. No hammering of the airend due to its inertial movement, but a gradual turn-off.

  • “ No Key “ control panel, one button to start the machine.

  • Anti-repetitiveness system on the engine start. Avoids stating motor anomalies.

  • Centralized control panel for easy monitoring

  • Skid, axles of different types, with or without brakes, lights to be fit for road circulation under severe homologation parameters.

  • Low life-cycle cost

  • Manufactured in compliance with applicable international standards (CE, ASME, DOSH)

  • Paradigm compressor for higher performance
  • JCB or Perkins Stage II engine
  • Customized sandblasting version (cool+dry air) available
  • These models can be used in Countries where emission norms and specific regulations do not apply.

MDVS 125 C

Working pressure 7 bar / 100 psi 10 bar / 145 psi 12 bar / 174 psi
Free air delivery 12000 lt/min / 424 cfm 11000 lt/min / 388 cfm 10000 lt/min / 353 cfm
  • Paradigm compressor for higher performance
  • Cummins Stage IV engine
  • This model is specific for Europe, but can be used worldwide.
  • Local differences in size, weight and aspect could apply.
  • European road homologation available

MDVS 170 J

Working pressure 7 bar / 100 psi 10 bar / 145 psi 12 bar / 174 psi 14 bar / 200 psi
Free air delivery 17000 lt/min / 600 cfm 15000 lt/min / 530 cfm 13400 lt/min / 474 cfm 12000 lt/min / 423 cfm
  • Flexible high-performance air compressor
  • JCB Stage IIIa engine
  • Customized sandblasting version (cool+dry air) available
  • This model can be used in Countries where emission norms and specific regulations do not apply.

MDVS 255 C

Working pressure 8 bar / 116 psi 10 bar / 145 psi 12 bar / 174 psi
Free air delivery 25300 lt/min / 893 cfm 22700 lt/min / 802 cfm 20500 lt/min / 723 cfm

MDVS 255 D

Working pressure 7 bar / 100 psi 10 bar / 145 psi 12 bar / 174 psi
Free air delivery 25300 lt/min / 893 cfm 22700 lt/min / 802 cfm 18000 lt/min / 636 cfm
  • Heavy duty air compressor
  • Cummins Stage IIIa or Deutz Stage II engine
  • Customized sandblasting version (cool+dry air) available
  • This model can be used in Countries where emission norms and specific regulations do not apply.